About Us
PT. DSIndonesia Indah Karya specializes in Manufacturing, Mechanical and Electrical Engineering, Construction, Procurement, and Modified Container Construction.
Our Vision is to be The Contractor of Choice for Your Mechanical, Electrical and Construction Project.
Our Mission is to be a Leader in our industry and to maintain the Highest Quality and Safety Standards for our Customers.
PT. DSIndonesia Indah Karya (PTDSIIK) specializes in Manufacturing, Mechanical and Electrical Engineering, Construction, Procurement, and Modified Container Construction.
We are Commited to delivering top quality products, with competitive cost structures, and on-time delivery with the highest level of customer satisfaction.
Our customer partners see us as an integral part to their project success as we anticipate their needs and deliver products and services to their satisfaction.
As a result of our excellent work ethic and experience, our customers keep coming back to us.
We Believe in:
- Professionalism in all our employees
- Detail oriented work that leads to a high ROI
- 100% Commitment to safety processes
- 100% Compliance with industry best practices in-house and on-site
Our Growth is Our Customers’ Growth!
Take a look at our Completed Projects.
Here are some projects that we have successfully completed.
PT. Freeport Indonesia
- Office Containers
- Safety Equipment
- Parts, tools, etc.
PT. Dinamika Energy N (DEN)
- Flue gas duct
- Lower casing boiler
- Peep door
- Structure for stack PLTU
PT. PAL Indonesia
- Ducting for chemical tanker 24000DWT and steel work
PG Tjukir Jombang
- Condensor & Dump Leading
- Condensor Pan
- Staging Modification
PG Krembung Sidoarjo
- Anfil Unigator
- Boiler Tube
PT. Salim Ivomas P (Bimoli)
- Cyclone Separator Service
- Flexible Joint Service
PT. Indofood Sukses M
- Washing Tank Relocation
PT. Setia Kawan (Paper Factory)
- Flange Spacer
- Bevel Gear
- Mechanical Seal (Recondition)
PT. Beta Surya Tata G / Santos Oil & Gas
- Demolition, Air System Instrument & Fire Water Replacement
PT. Classic Carpet
- Ducting for air heater
PT. Indo Acitama Solo
- Conical Vacuum Pump
- Drum Dryer
PT. RAPP Riau
- Pulper Ducting
PT. Sandvik
- Office Containers
- Safety Equipment
- Tools, Parts, etc.
PT. Bakti Pertiwi Nusantara
- Office Containers
- Building Contruction
Workshop:
Area:
- Wide Range: 3.5 Ha
- Working Area: 3.0 Ha
Employees:
- Engineering: 10 persons
- QA / QC: 6 persons
- PPC: 20 persons
- HSE: 2 persons
- Man Power:
- Qualified Welder: 20 persons
- Fitter: 50 persons
- Helper: 70 persons
- Expandable Quantity
Our production capacity in normal conditions is now 8500 tons/year to meet with requirements of every industrial sector.
I. Material Storage
- 1 (one) Overhead crane cap. 3 tons
- 1 (one) Overhead crane cap. 1.5 tons
- 1 (one) Wall Jib crane 1.5 tons – R. 3000
II. Preparation I
- 1 (one) Overhead crane cap. 5 tons
- 1 (one) Drilling Machine Ø 16mm
- 1 (one) Circular Saw machine Ø 660
- 1 (one) Hack Saw machine Ø 14″
- 1 (one) Profile cutting machine
- 1 (one) Autogen cutting machine on pattern
- 1 (one) Double coulomb cut.machine t.55
- 1 (one) Double coulomb cut.machine t.200
- 1 (one) Plasma Jet cutting t.90mm
- 1 (one) Plate bend/Roll t.9xØ800xw.3200
- 1 (one) Welding position/Turn table 30tons
III. Preparation II
- 1 (one) Overhead crane cap. 7,5 tons
- 1 (one) Radial Drilling Machine Ø38mm, R.1200
- 1 (one) Radial Drilling Machine Ø100mm, R.3000
- 1 (one) Radial Drilling Machine Ø25mm, R.1200
IV. Preparation III
- 2 (two) Overhead crane cap. 2,0 Tons
- 1 (one) Plate shearing machine t.6 x 3000
- 1 (one) Excentric press machine cap.50 Tons
- 1 (one) Plate rolling Machine t.6xw.2000. Ø300
- 1 (one) Plate rolling Machine t.20xw.1800. Ø350
V. Blasting Room
- 1 (one) Lorry on rail road cap 20T (electric)
- 1 (one) Lorry on rail road cap 5 T
- 2 (two) Blower dia 600
- 1 (one) Steel grit blasting 6Kg/cm2
- 1 (one) Water pump installation
VI. Assembling I
- 1 (one) Overhead crane cap. 12 Tons
- 1 (one) Lorry on rail road cap 20T (electric)
- 1 (one) Annealing Furnace automatic & manual control. max. temp.1000 C⁰, Room 11 x 4 x 3 M
- 1 (one) Welding turning table, cap. 10 Tons
- 11 (eleven) SMAW Welding transformer 500A
- 1 (one) Welding manipulators
- Horizontal traveling stroke 6000mm
- Horizontal traveling speed 150mm
- Horizontal quick feeding speed 3000mm/min
- Vertical lifting stroke 6000mm
- Vertical lifting speed 500mm
- 1 (one) Submerged Arc Welding 113 KVA
- 1 (one) DC motor generator Welding 60-500Amp22 KVA
VII. Assembling II
- 2 (two) Overhead crane cap. 7,5 Tons
- 6 (six) SMAW Welding transformer 450 A
- 4 (four) GTAW Welding transformer 300 A
- 1 (one) DC motor generator Welding 60-500Amp22 KVA
- 1 (one) Welding Positioner, cap. 2,5 Tons
VIII. Assembling III
- 2 (two) Overhead crane cap. 10 Tons
- 1 (one) Welding turning table, cap. 40 Tons
- 1 (one) Radiography room 10 x 10 M
- 1 (one) Hydraulic press 100 Tons
- 1 (one) Pipe bend machine Ø165 x R.700
- 1 (one) Profil bend for Unp, t.22
- Metal spray Eq’t Ø1/8″ – 3/16″
IX. Machining
- 3 (three) Tool grinding Ø8″ – 10″ – 12″
- 1 (one) Vertical balancing Ø36″
- 1 (one) Horizontal balancing Ø2100×400-7000Kg
- 2 (two) Carousel lathe Ø1250; Ø1500
- 8 (eight) Horz. lathe Ø400, Ø475, Ø610, Ø1000, Ø1600, Ø5000
- 2 (two) Gear hobbing/Milling Ø730,Ø1600
- 2 (two) Univ.milling 915x305x455; 600x250x150
X. Quality Inspection
- 1 (one) RT. 150-250KVA, Power 1,8KVA
- 1 (one) UT. Eq’n test range 10-11.200 mml
- 1 (one) Pendulum hammer test 30 Kgf
XI. Maintenance
- 3 (three) Air Compressor 40 PK
- 1 (one) Air Compressor 60 PK
- 3 (three) Air screw Compressor 9,9Kg/cm2
- 3 (three) Portable Air Compressor 7Kg/cm2
Let’s Build Something Together
Building & Construction
- Concrete Buildings and Houses
- Prefabricated Building
- Topography
- Soil Testing
Remote Facilities on Site
- Remote Offices, Meeting Rooms,
- Communication/Staging Centers
- Accommodations
- Public toilets, Showers
Trading & Procurement
- Hydraulic Engine, Machine Actuators and Spare Parts
- Cutting Tools, Machine Tools
- Heavy Duty Equipment, Earth-moving Undercarriage
Our Customers Love Our Work
“I was very surprised when PT. DSIndonesia Indah Karya managed to fulfill an order for a significantly large amount of mining equipment that we needed to complete our project. I have 100% confidence in them!”
“We have been working with PT. DSIndonesia Indah Karya for about 15 years now. They have helped us complete many projects successfully and are now at the top of our list of companies that we work with. I recommend them!”
“Our company is quite small but thanks to PT. DSIndonesia Indah Karya backing us and working with us every step of the way, we have been able to complete many big projects for our customers. I highly recommend them.”
Contact Us
PT. DSIndonesia Indah Karya
A Construction, Engineering, Procurement and Modified Container Specialist in Indonesia.
We are commited to deliver top quality products, with competitive cost structures, and on-time delivery with the highest level of customer satisfaction.
Griya Permata Hijau Blok B 7-8 Candi,
Sidoarjo 61271 Jawa Timur - Indonesia
Phone: +62 811323658
ptidsik@gmail.com